山と道

MINI2

398g

¥ 28,050 Tax included

Introduction

UL Backpack for Overnight Hiking

The MINI2 is a slightly modified MINI, optimized for overnight ultralight hiking and fastpacking, and though lightweight, comfortably carries everything you need for one to two overnight stays.

Since 2021, the main fabric is made of our new proprietary 70D HT PC Coated Ripstop Nylon, which is much more durable and stronger than the conventional Skylite material. It is polycarbonate-coated for better anti-hydrolyzation performance than regular polyurethane-based fabrics.

The design is inspired by the classic UL backpacks in the 2000s with large front mesh pocket. It is light but large enough for one to two overnight stays with ultralight items.

*The results of the Tropical Test, aka Jungle Test, showed that the new material ​will not significantly deteriorate for 10 years.

Color

  • Elm
  • Mustard
  • Gray
  • Black

Spec

Made in Toyooka, Japan

Capacity:
Size M 25-35L/1525-2135 cu in
Size L 28-38L/1708-2318 cu in
Weight:
Size M 398g (Without Accessories)
Size L 416g (Without Accessories)
Body Material:
70D HT PC Coated Ripstop Nylon, 106g/㎡
Front & Side Pocket Material:
Hard Mesh
Bottom Material:
X-Pac VX21, 203g/㎡
Back Panel Material:
3D Mesh
200D HT PC Coated Oxford Nylon, 144g/㎡
Accessories:
Minimalist Pad (45 x 90 x 0.5cm / 43g)
Hip Belt
Size:
UNISEX | M / L

Product Story

New Buddy for Hiking

Akira Natsume (Yamatomichi Founder)

To test Yamatomichi’s THREE pack in 2014, I hiked from the Oyashirazu coast of the Japan Sea to Hirayu, passing through the Northern Japanese Alps. I extended my hike further into the very deep alpine area of the Southern Alps from Jizo-ridge, and ultimately reached Tohyamago area, the southern part of Nagano Prefecture. After this trip, I realized that on my next long hike I wanted to travel much lighter so that I could almost just jump from one mountain to the other.

I tried to visualize the ideal backpack for this kind of hiking and came up with an image of a small, simple, and obviously lightweight backpack that I thought would be “just the right thing.” It didn’t have to be either eccentric-looking or technically advanced, but a pack I would just grab without any hesitation—just like the classic silnylon backpack I yearned for in the early days of ultralight hiking.

In those days, technically advanced materials such as X-Pac that we use in the THREE backpack, and Cuben hybrid composite were all the talk, while rip-stop nylon material like silnylon was considered a little outdated. But I was determined to create a new backpack with Skylite that has a similar texture to silnylon, in a kind of homage to the simple backpack that brought about ultralight hiking back in the day.

I also decided that the front pocket should be in a mesh.

Before I made THREE with its mesh pocket similar to the one we use on MINI2, I had been skeptical about adopting mesh for the rainy climate of the Japanese mountains. I initially felt mesh pockets were impractical since the rain could easily soak the contents. Even during my hiking test of the mesh-pocketed THREE, I didn’t like how everything seemed to be getting wet in the beginning, but after several days of hiking, I gradually came to like the function of the mesh pocket. I could stow my still moist tent in the morning without much thought, and the mesh material allowed me to easily see what was inside the pocket.

Sure, things could get wet easily in a mesh pocket, but they would dry quickly too. Hiking became more carefree and natural for me than ever before, and the mesh pocket perfectly synced with my feelings at that time.

With all this in mind, I decided to base the new design on our MINI, but in different materials and with mesh pockets. The original MINI fits your body when you carry it on the upper part of your back, and it is so comfortable that you feel as though you can go on walking forever. The new pack was going to be an updated version of the MINI so I simply called it MINI2.

In 2015, I traveled from the Japan Sea through the Pacific Ocean, traversing through the mountains in a fastpacking style with a prototype of the MINI2.

It was autumn, and the first snow of the season gently covered the mountains. I carried only the bare essentials to minimize the base weight down to 2.2kg, limiting the total weight, including food and water, to under 5kg.

I was in complete harmony with my surroundings. The journey seemed to open up a whole new world. The MINI2 became like a part of me throughout the journey, allowing me to run parts of the trail and jump from one mountain to the other as I had initially dreamed of doing.

I use MINI2 daily now, and I just use waterproof Ziplocs when I stow items in the mesh pocket on a rainy day.
Without a doubt, MINI2 is more of a mountain-oriented backpack than a town-use daypack. And I can’t wait to take it on another long trail soon again.
(Originally written in 2016)

Revised in April, 2021

The MINI2, originally released in 2016, is updated and now uses “70D HT (High Tenacity) PC (Polycarbonate) Coated Ripstop Nylon”. I loved the previous Skylite material, but now I think I was being too ultralight-oriented at that time;
When we established Yamatomichi, I was thinking, “It’s totally fine to use such a paper-thin fabric.” because lightness mattered way more than durability or strength for UL hikers. I was certain that a single ultralight hiking experience could be life-changing.

As MINI2 users increased over time, I began to worry about whether the customers are using the MINI2 with no problems, as it focuses way more on lightness than durability. Perhaps I gradually became more flexible than I had been and wanted the MINI2 to be more durable and last longer, to be the hikers’ favorite for many years.

Then, back in 2017, I traveled all over Japan and met many people in the Yamatomichi HLC events, and I realized something. In this country, the UL hikers that I imagined were actually very few.

What is Yamatomichi gear meant for? Was I being too selfish when I chose paper-thin material to create the MINI2? I took a close look at the items we had created over again.

What can we do to make the MINI2 better?
I decided to enhance durability and strength even though it can cause some weight gain. We also adopted polycarbonate-coated fabric, which is supposedly rarely hydrolyzed, for better durability.

The development of this proprietary fabric was more difficult than expected and it has been a long and challenging development. Now, we are happy to announce that the new MINI2 is finally on sale and ready to be shipped to you. I hope that many hikers will enjoy the long hiking trips with our new backpack.

READ MORE

Form and Function

High Capacity Mesh Pocket

Suppose you wake up in the morning to find it raining, pack up all your gear inside the tent, or under the tarp, and you are almost ready to leave, but what do you do with the tent you are in? With our lidless MINI2, you just tuck the tent in the front pocket after packing up everything else inside and are ready to go.

The MINI2 is equipped with a high-capacity front pocket similar to that of our THREE backpack, offering maximum convenience on the trail.

Designed for Comfortable Hiking

The MINI2 is designed to carry up to around eight kilograms of total weight and comfortably distribute the load in the upper back part of your torso, as well as around your chest without relying on your waist to support the weight. This frees your waist from the load and makes it easy for you to comfortably walk around the often steep mountain trails in Japan.

Highly Versatile

The MINI2 has a long tubular roll-top and large-volume front and side pockets with a capacity total of over 30 liters. You can be creative and use the top strap, bungee cords and bottom attachment loops to carry even more.

Details

Integrated Minimalist Pad

We have included a Minimalist Pad (H45cm x W90cm x D0.5cm / 43g) in the back of the MINI. The Minimalist Pad is removable and can be used as a sleeping pad or an emergency pad to keep you warm.

Options

We offer a number of options to expand the features and capacity of your MINI2.

Overnight Hiking with the MINI2

Several years ago, the standard volume of backpacks for ultralight hiking was around 35-45 liters. However, gear is increasingly getting lighter and more compact, allowing for overnight hikes with much smaller packs. Many traditional hikers might still be skeptical about overnight hiking with a small 25-35 liters backpack like the MINI2, we wanted to share a couple of gear list examples for overnight stays with the MINI2.
Below products are old versions, but the capacity is the same as the current MINI2.

Akira Natsume’s (Yamatomichi Founder) Gear List

For this fastpacking trip, Akira traversed from the Oyashirazu coast of the Sea of Japan to Hirayu, passing through the Northern Alps. He traveled extremely lightly this time, carrying only the bare essentials with a base weight of only 2.2 kg and just under 5 kg in total pack weight. With the MINI2, he was able to keep going for six days without any problems.

Yusuke Kurosawa’s (Previous Yamatomichi Staff) Gear List

The below is what ultralight hiker Yusuke Kurosawa brings when he is hiking the Japanese Alps in the summer or lower-lying mountains in the spring or autumn. By eliminating items you really don’t need, you will find the MINI2 more than large enough for overnight hiking.

Material

70D HT PC Coated Ripstop Nylon

Material: 70 Denier High-tenacity Nylon, 
Polycarbonate Coating, DWR (Durable Water Repellent)
Weight: 106g/m2

This 70 denier HT (high-tenacity) ripstop nylon fabric is our proprietary material with enhanced strength and durability compared with conventional nylon. The surface is DWR (durable water repellent) finished, and the backside is polycarbonate coated, achieving a much better anti-hydrolyzation performance than regular polyurethane-based fabrics. The results of the Tropical Test, aka Jungle Test, in which the fabrics are left in a machine with 95% humidity, temperatures at 70°C for ten weeks, showed that the new material ​will not significantly deteriorate for 10 years.

In-house test results (Variations may occur according to the actual production lot):
Tensile strength (JIS L 1096 A method): 97.2kg (vertical), 63.6kg (horizontal).
Tear strength (JIS L 1096 A method): 6.8kg (vertical), 3.9kg (horizontal)
Water pressure resistance (JIS L 1092B): 4079mm

X-Pac VX21

Material: 210 denier nylon, Black polyester X-Ply, Polyester film, 50 denier polyester (Durable water repellent)
Weight: 203g/m2

In order to reinforce the bottom part, we have used X-Pac VX21 that is characterized by superior tear strength, high durability and full water resistance. X-Pac VX21 is a multi-layer fabric that we use for all bottom parts of our backpacks. It is comprised of a wear-resistant 210 denier nylon on the surface, a water resistant PET film in the middle, and a 50 denier polyester taffeta and diamond-patterned black polyester X-Ply material at the bottom.

Test results (Variations may occur according to the actual production lot)
Tensile strength (JIS L 1096 A method): 123kg (vertical), 119kg (horizontal)
Tear strength (JIS L 1096 A method): 12.2kg (vertical), 9.9kg (horizontal)

Size

Size M L
体重
(Weight)
kg
42~69 67~85
胸囲
(Chest)
cm
78~95 92~110
身長
(Height)
cm
150~175 170~190
背面長
(Back Length)
cm
45~54 54~57

We offer two sizes of the MINI2. In general, we recommend the larger L size if you are over 175cm tall, but as all people are different we recommend you try out the two different sizes before you buy if at all possible.

Please also use the below guide for reference when deciding on which MINI2 to buy.

  • The length of the shoulder strap is the straight line from the base of the strap to the end of the core material.
  • Please refer to the ONE Custom Order page for more information on how we measure the length of the back of our backpacks.
  • MINI2 made before 2018 are all size M.

Please Note

Care Instructions

  • Hand-wash only. Do not machine-wash.
  • Submerge the product in lukewarm water with a correct amount of neutral detergent, and hand-wash it.
  • Do not bleach. Do not use fabric softner.
  • Remove any optional parts such as pads before washing.
  • Wash off any noticeable stains or smudges with a washing brush or soft sponge.
  • Rinse well so that no detergent remains.
  • Drain the backpack with the mouth down. Keep dry in a shade.
  • Store in a dark, well-ventilated place.
  • Do not iron.
  • Hand-wash the pad gently, rinse well, and keep dry in a shade.

Payment

  • We only accept payment by credit card. We currently do not accept payment via bank transfer from overseas accounts.
  • We accept the following Credit Cards: Visa, Master, American Express, and JCB.
  • To download your receipt, please click the link included in the Dispatch Notice, which we will send by email as soon as the items are dispatched.

Delivery

We will ship by DHL for overseas customers (excluding China, Hong Kong, Taiwan, Korea and Russia). For customers in China, Hong Kong, Taiwan, Korea and Russia, we will ship by EMS only. Shipping costs vary depending on your country and region.

Size Exchange

  • Overseas customers who need to change the size of their order, should note that the time needed for shipping will vary greatly depending on your country of residence.
  • We only accept exchanges when the item is unused (except for fitting).
  • If you wish to exchange the size of the item, please contact us within seven days of receiving your order.
  • Exchanges can only be made for the same color in a different size.
  • If the size you wish is out of stock, we will suggest a different color.
  • If the product is out of stock, we may simply have to ship the item back to you.
  • All shipping costs to be carried by the customer.
  • We will only send the exchanged item to you, upon receipt of return shipping cost via PayPal.
  • Please be aware that some countries charge customs duties depending on the price of the item.
  • We are unable to answer any questions on local customs. Please contact your local customs bureau.

Repair

We accept repairs for all of our Yamatomichi products. For inquiries on repair services including patching the holes, repairing with extra components, or fixing the items damaged over time, please feel free to contact us from the “Repair” section of the SUPPORT page.

Repair Tape

  • For temporary repair, please keep the repair tape in your emergency kit.
  • The repair tape should be patched up on both the front and back sides of the fabric. The tape must be larger than the damaged or torn part of the fabric.
  • If you round the edges of the patch, it will last longer.
Restock Alert


MINI2

入力したメールアドレスは無効です

登録が完了しました。 Close