山と道

MINI Custom Edition

340g

¥35,200 Tax included

Introduction

Customizable MINI

The MINI Custom Edition is a customizable version of our regular MINI. You can choose your favorite material and color of the following parts:

  1. Body/roll top
  2. Front pocket
  3. Bottom
  4. Zipper

  • The back panel material and side pocket material are not customizable.
  • Can only be ordered at certain times (see above for current order period)
  • As these backpacks are completely made to order, please allow for ample production time.
  • The order period is not regular.

For detailed information about MINI, please visit MINI’s webpage.

Custom Order

Our MINI Custom Edition backpacks are all unique and can only be ordered during specific periods of the year.

Order period: May 11-May 22
Delivery schedule: October or November

  • Production may delay due to unforseeable reasons.
  • Please note that we only accept a limited number of orders. We may close the reservation window if orders fill up quickly.

Shopping Cart Rules

Regular items, pre-order items, and custom orders cannot be purchased at the same time as they are shipped at different times. Please place an order separately. Also, please understand we are unable to ship items ordered separately in the same package.

Examples of Custom Orders

The examples of custom orders are shown below. Please note that some zippers and fabrics are currently discontinued and unavailable:

Spec

Made in Tokyo, Japan

Capacity:
Size M 25-30L
Size L 28-32L
Weight:
Size M 380g (Without Accessories)
Size L 398g (Without Accessories)
Material:
Body: Selectable
Front Pocket: Selectable
Side Pocket: Lycra Twill 226g/㎡
Bottom: Selectable
Back Panel:
3D Mesh
200D HT PC Coated Oxford Nylon 144g/㎡
Zipper: Selectable
Accessories:
Minimalist Pad (45x90x0.5cm/43g)
Hip Belt
Reflectable Bungee Cord
Repair Tape
Size:
UNISEX | M / L

Material

The MINI Custom Edition is a customizable version of MINI. Customers can select from BLACK UHPE Fine Grid and 70D HT PC Coated Ripstop Nylon which are our proprietary, and highly water-resistant X-Pac. Which fabric is used for which part, and the color of the fabrics are also selectable.

BLACK UHPE Fine Grid

AVAILABLE FOR: BODY/ROLL TOP, POCKET, BOTTOM

The new BLACK UHPE Fine Grid is our proprietary fabric that uses robust 200 denier high-tenacity nylon with extremely tough and light ultra-high molecular weight polyethylene (UHPE or UHMWPE) fiber* woven at 2mm intervals as a ripstop.

Of all the fabrics we use for our backpacks, it is the most tear-resistant yet super light and strong.

To keep it light, only the BLACK UHPE’s front surface has only been treated with a durable water-repellent treatment, whereas the backside is not coated. Use a pack liner or waterproof stuff sack to keep your items inside dry. Being non-coated means that the fabric is highly resistant to deterioration from hydrolysis and general use.

*The UHPE fiber is also known by trade names such as Dyneema or Spectra. It is an ultra-high molecular weight polyethylene material, generally conceived as white, but we adopted the black UHPE fiber.

Material: 200 Denier Ultra High Molecular Weight Polyethylene (UHPE) Fiber, 200 Denier High-tenacity Nylon
Coating: C6DWR (Durable Water Repellent)
Weight: 128g/㎡

In-house test results*:

  • Tensile strength (JIS L1096A): 180kg (vertical), 160kg (horizontal)
  • Tear strength (JIS L1096A): 20kg (vertical), 17kg (horizontal)

*Variations may occur according to the actual production lot.

70D HT PC Coated Ripstop Nylon

AVAILABLE FOR: BODY/ROLL TOP, FRONT POCKET, BOTTOM

This 70 denier HT (high-tenacity) ripstop nylon fabric is our proprietary material with enhanced strength and durability compared with conventional nylon. The surface is DWR (durable water repellent) finished, and the backside is polycarbonate coated, achieving a much better anti-hydrolyzation performance than regular polyurethane-based fabrics. The results of the Tropical Test, aka Jungle Test, in which the fabrics are left in a machine with 95% humidity, temperatures at 70°C for ten weeks, showed that the new material ​will not significantly deteriorate for 10 years.

Material: 70 Denier High-tenacity Nylon, Polycarbonate Coating
Coating: C6DWR (Durable Water Repellent)
Weight: 106g/㎡

In-house test results*:

  • Tensile strength (JIS L1096A): 97kg (Vertical), 64kg (Horizontal)
  • Tear strength (JIS L1096A): 7kg (Vertical), 4kg (Horizontal)
  • Water pressure resistance (JIS L1092B): 4079mm

*Variations may occur according to the actual production lot.

X-Pac VX07

AVAILABLE FOR: FRONT POCKET

X-Pac VX07 is a multi-layer fabric comprised of 70 denier nylon on the surface, a water-resistant polyester film in the middle, and a 50 denier polyester taffeta and diamond-patterned black polyester X-Ply material at the back. It is highly durable and water-resistant with hydrostatic water-resistant structural technology.

Material: 70 Denier Ripstop Nylon, Black polyester X-ply, 0.25 polyester film, 50 Denier polyester (Durable water repellent)
Weight: 162.7g/㎡

In-house test results*:

  • Tensile strength (JIS L1096A): 111kg (Vertical), 92kg (Horizontal)
  • Tear strength (JIS L1096A): 11kg (Vertical), 8kg (Horizontal)
  • Water pressure resistance (JIS L1092B): 40991mm

*Variations may occur according to the actual production lot.

X-Pac VX21 Soft

AVAILABLE FOR: FRONT POCKET

This 210 denier HT (high-tenacity) ripstop nylon fabric is our proprietary material with DWR (durable water repellent) finished on the surface, while the backside is polycarbonate coated, achieving a much better anti-hydrolyzation performance than regular polyurethane-based fabrics.

Material: 210 denier nylon, Black polyester X-Ply, Polyester resin, 50 denier polyester
Coating: DWR (Durable Water Repellent)
Weight: 188g/㎡

In-house test results*:

  • Tensile strength (JIS L1096A): 119kg (Vertical), 96kg (Horizontal)
  • Tear strength (JIS L1096A): 14kg (Vertical), 14kg (Horizontal)
  • Water pressure resistance (JIS L1092B): 6526mm

*Variations may occur according to the actual production lot.

X-Pac VX21

AVAILABLE FOR: BOTTOM

X-Pac VX21 is adopted for the bottom material of our standard backpacks. It is a multi-layer fabric composed of 210 denier nylon on the surface, a water-resistant polyester film in the middle, and a 50 denier polyester taffeta and diamond-patterned black polyester X-Ply material at the back. It is highly durable and water-resistant with hydrostatic water-resistant structural technology.

Material: 210 denier nylon, Black polyester X-Ply, Polyester film, 50 denier polyester
Coating: DWR (Durable Water Repellent)
Weight: 203g/㎡

In-house test results*:

  • Tensile strength (JIS L1096A): 123kg (Vertical), 119kg (Horizontal)
  • Tear strength (JIS L1096A): 13kg (Vertical), 10kg (Horizontal)
  • Water pressure resistance (JIS L1092B): 50985mm

*Variations may occur according to the actual production lot.

Comparison Chart of Fabrics

The blue number shows the weight (gram per square meter), and the black number indicates the tear strength (kilogram). The 70D HT PC Coated Ripstop Nylon is lighter, but the BLACK UHPE is stronger and more durable.

How to Order

Select Material and Color

The MINI CUSTOM EDITION is a customizable version of our regular MINI. You can choose your favorite material and color of the following parts:

1. Select body/roll top material

BLACK UHPE Fine Grid

70D HT PC Coated Ripstop Nylon

2. Select pocket material

BLACK UHPE Fine Grid

70D HT PC Coated Ripstop Nylon

X-Pac VX07

X-Pac VX21 Soft

3. Select bottom material

BLACK UHPE Fine Grid

X-Pac VX21

4. Select zipper type/color

The zipper type is subject to which fabric you choose for the pocket: The normal coil zipper will be installed if the BLACK UHPE or 70D HT PC Coated Ripstop Nylon fabric is selected with no water resistance, while the water repellent zipper is equipped for the water-resistant X-Pac fabrics. Choose your favorite color from 14 choices!

Coil Zipper: YKK #5 Coil Zipper
70D HT PC Coated Ripstop Nylon
UHPE 200 Fine Grid

Water repellent zipper: YKK #5 Aquaguard®︎
X-Pac VX07
X-Pac VX21 Soft

Coil Zipper

Water-repellent zipper

Size

Size M L
体重/Weight
kg
42~69 67~85
身長/Height
cm
150~175 170~190
背面長/Back Length
cm
45~54 54~57

As a rough guide, we recommend the L size for people over 175cm, but there are people 170cm tall and the L is perfect for them. We recommend trying before buying.

  • The length of the shoulder strap is the straight line from the base of the strap to the end of the core material.
  • Please refer to the ONE product page for more information on how we measure the length of the back of our backpacks.

Support

Ordering

  • We take preorders to avoid overproduction, so we are unable to accept any amendments to your order after the order period is over.
  • Cancellations and changes to orders can be made during the order period.
  • As they are completely made to order, please allow for ample production time.
  • The color of the fabric may vary slightly depending on production variations.
  • Custom-order is limited to one product per order.
  • We do not accept the return of the items due to customer’s personal reasons or preferences after the product is delivered.

For inquiries, please contact HERE.

Care Instructions

  • Hand-wash only. Do not machine-wash.
  • Submerge the product in lukewarm water with a correct amount of neutral detergent, and hand-wash it.
  • Do not bleach. Do not use fabric softener.
  • Remove any optional parts such as pads before washing.
  • Wash off any noticeable stains or smudges with a washing brush or soft sponge.
  • Rinse well so that no detergent remains.
  • Drain the backpack with the mouth down. Keep dry in a shade.
  • Store in a dark, well-ventilated place.
  • Do not iron.

Payment

  • We only accept payment by credit card. We currently do not accept payment via bank transfer from overseas accounts.
  • We accept the following Credit Cards: Visa, Master, American Express, and JCB.
  • To download your receipt, please click the link included in the Dispatch Notice, which we will send by email as soon as the items are dispatched.

Delivery

We will ship by DHL for overseas customers (excluding China, Hong Kong, Taiwan, Korea and Russia). For customers in China, Hong Kong, Taiwan, Korea and Russia, we will ship by EMS only. Shipping costs vary depending on your country and region.

Repair

We accept repairs for all of our Yamatomichi products. For inquiries on repair services including patching the holes, repairing with extra components, or fixing the items damaged over time, please feel free to contact us from the “Repair” section of the SUPPORT page.

Repair Tape

  • For temporary repair, please keep the repair tape in your emergency kit.
  • The repair tape should be patched up on both the front and back sides of the fabric. The tape must be larger than the damaged or torn part of the fabric.
  • If you round the edges of the patch, it will last longer.
Restock Alert


MINI Custom Edition

入力したメールアドレスは無効です

登録が完了しました。 Close

MORE